Ink conductive interactive wall practice?
Published on: January 23, 2024 Author: curious numbers
In today's digital era, interactivity has become an essential element in many design fields. Among them, ink conductive interactive wall, as an innovative way of display, has attracted more and more attention. It not only provides visual attraction, but also allows the audience to participate in person, improving the interactivity and sense of participation. Next, we will discuss in detail how to realize the ink conductive interactive wall.
1、 Material preparation
To realize the ink conductive interactive wall, the following materials need to be prepared first:
Ink: used to draw circuit patterns on the wall. Ink with conductive properties should be selected, such as graphene ink or metal powder ink.
Transparent conductive film: used to cover the circuit pattern drawn by ink to improve the conductivity and stability.
Sensor: It is used to detect the touch behavior of the user. It can be a capacitive sensor or a resistive sensor.
Controller: used to receive the signal from the sensor and control the response of the wall according to the signal.
LED lights or other display elements: used to display interactive effects on the wall.
2、 Manufacturing steps
Wall treatment: apply a layer of conductive materials, such as conductive paint or conductive adhesive, on the wall to ensure good conductivity of the wall.
Draw circuit pattern: use ink to draw the required circuit pattern on the wall. You can use templates or draw manually. To improve the conductivity, you can heat or UV cure after painting.
Covering conductive film: the transparent conductive film is covered on the drawn circuit pattern to improve the conductivity and stability. It can be fixed by pasting or hot pressing.
Installation of sensors: select appropriate sensors and install them on the wall according to the design requirements. Paste or embedded installation mode can be selected.
Connect controller and display element: connect the sensor to the controller and connect the controller and display element. Ensure stable and reliable connection.
Programming and debugging: according to the design requirements, write the control program and debug the system to ensure that the interaction effect works normally.
Installation and maintenance: install the finished ink conductive interactive wall at the predetermined position, and carry out necessary maintenance and cleaning.
By following the above steps, an innovative and attractive ink conductive interactive wall can be produced. This interactive wall can be used in various occasions, such as commercial exhibitions, educational institutions, public spaces, etc., to bring people a new interactive experience.
